Filter
Top Products
3
Powering Up
1. Connect the power cord.
Insert one end of the power cord into the power connector on the Clavinova, and
the other end into a standard wall outlet. (If your unit comes with a plug adaptor
and its use is required, please connect it to the end of the cord before plugging in.)
2. Switch on the power.
The [POWER] button is located to the left of the keyboard. Press it once to
switch the power on.
The display comes on, and the power indicator on the front left of the
instrument lights up. One or more panel indicators also light up.
To switch the power off, press [POWER] once again.
The display and indicators all go off.
Adjusting the Volume
You adjust the volume by moving the [MASTER
VOLUME] slider up or back. Adjust as necessary while
playing on the keyboard.
Using Headphones
You can connect headphones to either
or both of the PHONES jacks. The
connection automatically cuts off
output from the Clavinova’s speakers.
Two jacks are provided so that two
people can listen at the same time.
(Headphones must be purchased
separately.)
CLP-811/611 Getting Ready
A
C
IN
LE
T
The power inlet is located at
rear of Clavinova, on the
underside of the main unit
(directly above the backboard.)
BRILLIANCE
REVERB EFFECT TOUCH
NORMAL
ROOM
MEDIUM
TEMPO
POWER
Power indicator
PHONESMIC.MIC. VOL.
MIN MAX
CLP-811
MASTER VOLUME
MAX
MIN
Louder
Softer
PHONESMIC.MIC. VOL.
MIN MAX
Standard jack
for stereo headphones
CLP-811
CLP-611
PHONES
The power indicator is located on
the front side, so that you can tell
if power is on even with the key
cover closed.
The [MASTER VOLUME] slider
also controls the output level to
the PHONES and AUX OUT
jacks.
Recommended headphones:
Yamaha HPE-160