Filter
Top Products
26
CLP-811/611 Configuration Functions (FUNCTION mode)
Basic Procedure
This section explains the procedure for viewing and changing the function settings.
BRILLIANCE
REVERB EFFECT TOUCH
TRANSPOSE
MELLOW
NORMAL
BRIGHT
ROOM
HALL 1
HALL 2
STAGE
CHORUS
SYMPHONIC
TREMOLO
ECHO
HARD
MEDIUM
SOFT
FIXED
SONG
MEASURE
TEMPO
SPLIT
FUNCTION
MASTER VOLUME
TRANSPOSE SPLIT
BRILLIANCEREVERB EFFECT TOUCH
VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2
VIBES STRINGS CHOIR BASS
HARPSI-
CHORD
PIPE
ORGAN
ORGAN
COMBINATION
METRONOME
TEMPO
–
/
NO
+
/
YES
SONG
SELECT
START
/
STOP
REC
RECORDER
12
DEMO
/
PIANO SONG
MAX
MIN
1 5
2 4 3 4 4
Procedure
1
Enter FUNCTION mode.
Press [FUNCTION].
The FUNCTION indicator lights up.
2
Select the main function.
Select the main function
using the [t] and [s]
buttons directly to the right
of the [FUNCTION]
button. (The arrow markings
are printed under the but-
tons.) Main functions run
from F1 to F15 (on the
CLP-811) or F14 (on the CLP-611).
3
Change the setting or select the subfunction using the
[-/NO] and [+/YES] buttons.
If there are no subfunctions: Pressing the button changes the value.
If there are subfunctions: Press [+/YES] to move to a subfunction.
4
Proceed using the following three sets of buttons.
■ Use the [t] and [s] buttons to cycle through subfunctions and main
functions.
■ Use the [-/NO] and [+/YES] buttons to set the value for the item
marked by the blinking cursor on the screen. Press both buttons at the
same time to return the value to its factory default.
■ If you are working at a screen with multiple settings, use SONG
SELECT [▼], [▲] to select the item you want to set. The selected
item will blink on the screen. (This operation is effective only with
screens that present more than one value.)
5
To terminate FUNCTION mode...
Press the [FUNCTION] button.
The FUNCTION indicator goes off, and the screen return to the
previous display.
It is not possible to enter
FUNCTION mode directly from
DEMO/PIANO SONG mode or
RECORDING or playback is in
progress.
BRILLIANCE
REVERB EFFECT TOUCH
NORMAL
ROOM
MEDIUM
TEMPO
Function number
Function name