Filter
Top Products
19
CVP-109/107/105/700
After you have changed a function’s value, you may find you want to
restore its basic setting. To demonstrate this, we’ll have to look at another of
the Clavinova’s displays. Press the [FUNCTION] button.
Resetting a Function’s Value
Basic settings
• The functions of the Clavinova are set
to certain standard values or standard
conditions when the instrument is
shipped. These settings and conditions
are called the basic settings.
• A function’s basic settings are gener-
ally noted in the sidebar together with
the possible settings for that function.
• You can also use the Recall function
(page 207) to restore basic settings at
any time.
This button calls up one of the Clavinova’s FUNCTION displays. You
can use this display to tune and transpose the keyboard.
MIXER FUNCTION
MASTER
EQUALIZER
SONG
Refer to page 188 for details on the
TUNE and TRANSPOSE functions.
The TUNE function in this display has ▼ and ▲ LCD buttons like the
ones you used in the VOICE SELECT display. You can use these buttons to
tune the keyboard up or down. Press and hold the ▼ button (or use the data
dial or the [–] button) to tune the keyboard down as far as it will go.
If you play a few notes, you’ll notice that your Clavinova is flat by quite
a bit. Now, let’s assume that you want to reset the keyboard to the standard
440.0 Hz. You could use the ▲ button (or the data dial, or the [
+
] button) to
return the value to its basic setting — but there’s an easier way:
When a function has a basic setting, you can reset it to that value by
pressing both the ▲ and ▼ buttons (or both the [–] and [+] buttons) si-
multaneously. Try doing this now.
There are some functions whose settings
cannot be returned to the basic value by
pressing the
▲
and
▼
buttons (or [–] and
[+] buttons) simultaneously.
When you’ve got the keyboard back in tune, you’re ready to go on to the
next operation.
Using the LCD Display Controls
17