Filter
Top Products
94
CVP-109/107/105/700
● Changing the section length:
MEASURE function
• Settings: 1 — 8
• Basic setting: Depends on style.
Clear section?
• You will have to clear all parts of the
currently selected section and start
recording from scratch if you change
the number of measures.
• The “Clear section?” message will not
be displayed if you have already
cleared the section by changing the
beat, as described above.
➾ Press OK to clear the section, or CANCEL to abort. Once the style
has been cleared, you can use the MEASURE button, the data
dial, or the [–] and [+] buttons to set the section length.
● When you’re done here:
Once the BEAT and/or MEASURE parameters have been set as re-
quired, press the PAGE [<] button to return to page 1 of the CUSTOM
STYLE display.
N Select the part you want to record................................................
Use the PART LCD button, the data dial, or [–] and [+] buttons to
select the part you want to record.
The R1 part is initially selected and set to
record.
Any part you select can be set to record by using the rightmost LCD
button to select RECORD after selecting the part.
R1 Rhythm 1
R2 Rhythm 2
Bs Bass
C1 Chord 1
C2 Chord 2
Pd Pad
P1 Phrase 1
P2 Phrase 2
Recording part
• Only one part can be set to record.
• All other parts will be set to PLAY (the
part number is surrounded by a box) or
OFF (only the part number is dis-
played).
Part containing no dataPlayback part
OFF
Creating Your Own Styles
Press the MEASURE button to change the number of measures in the
current section.
➔ The “Clear section?” message is displayed.
92
The length of the FILL IN section can
only be set to one measure.