Filter
Top Products
43
CVP-109/107/105/700
OCTAVE
• Settings: –2 (2 octaves lower)
–1 (1 octave lower)
0 (no octave shift)
+1 (1 octave higher)
+2 (2 octaves higher)
• Basic setting: +1
PAN
• Settings: L —
▼
— R
• Basic setting:
▼
(center)
PEDAL
• Settings: R (right only)
L (left only)
L+R (both)
• Basic setting: R
Playing Two Voices on Different Sides of the Keyboard — Split Mode
■ Setting the Octave of the Left Voice .............................................
The OCTAVE function in the KEYBOARD [LEFT] display lets you
adjust the pitch of the left voice up or down by one or two octaves. Press
the OCTAVE button.
➔ The value changes each time you press the button.
X Adjust the stereo position.
Use the data dial or [–] and [+] buttons to change the stereo position, or
hold down the PAN button to move the position to the right.
Press the [–] and [+] buttons simultaneously to restore the basic setting.
■ Setting the Stereo Position of the Left Voice ......................
The PAN function in the KEYBOARD [LEFT] display lets you ad-
just the stereo position of the left voice.
Z Press the PAN button.
➔ The PAN function is highlighted.
■ Setting the Range Affected by the Right and Left
Pedals.........................................................................................................................
The PEDAL function in the KEYBOARD [LEFT] display lets you
specify which ranges of the keyboard will be affected by the damper,
glide, and pitch bend functions (CVP-109/107/700) controlled by the left
and right pedals when playing in Split mode. Press the PEDAL button.
➔ The value changes each time you press the button.
■ Changing the Split Point............................................................................
You can use the SPLIT POINT function in the KEYBOARD [LEFT]
display to set the split point at any desired key position. In Split mode, the
left voice is played by all keys to the left of (and including) the split point.
The basic setting of the Split Point is F#2.
F 2
C3 C4 C5 C6 C7C2C1C0
Right range
Left range
SPLIT POINT
• Settings: Any key of the keyboard
• Basic setting: F
#
2
Some voices have octave settings that
are selected automatically when the
voice is selected. (Such settings are not
displayed by the OCTAVE function.) You
can prevent the octave setting from
changing when a voice is selected by
setting the VOICE SETTING function
(page 189) to MANUAL.
See pages 190 and 191 for a list of the
functions that can be controlled by the
left and right pedals.
41