Filter
Top Products
215
CVP-109/107/105/700
■ AUX OUT Jacks ....................................................................................................
By connecting audio cables to the
AUX OUT jacks as shown here, you can
output the sound of the Clavinova to a
stereo system, amplifier, mixing console,
or recording equipment. Since the AUX
OUT jacks provide output at a fixed
level, you will need to use the controls
on the connected equipment to adjust the
overall volume of the sound from the
Clavinova.
Use the AUX OUT [L/L+R] jack for
monophonic output. For stereo output,
connect the AUX OUT [L/L+R] jack to
the left channel input, and the AUX
OUT [R] jack to the right channel input.
You can connect an optional Yamaha
FC7 Foot Controller to the [EXP.
PEDAL] jack, located at the left on the
underside of the unit, to control the vol-
ume of your keyboard performance with
your foot.
Expression Pedal (CVP-109/107/700)
Stereo System
R
AUX OUT
L/L
+
R
EXP.
PEDAL
Audio and Video Connections
You can connect the Clavinova to a
television or video monitor to display the
lyrics and chords in your song data on a
larger screen.
Connect one end of a video cable to
the [VIDEO OUT] jack (standard pin
jack), which is located at the left on the
underside of the unit, and the other end
to the video input jack on your television
or video monitor. Make sure the
[VIDEO SELECT] switch is set to the
position (PAL or NTSC) that matches
the standard used by your video equip-
ment.
You can set the Clavinova’s video
display characteristics using the settings
in the FUNCTION [VIDEO OUT] dis-
play (page 212).
Video Monitor (CVP-109/107/700)
Television
VIDEO
OUT
213
Use an audio-video cable with good high-
frequency characteristics and RCA-type
pin jacks to connect the Clavinova to a
television or video monitor.