Filter
Top Products
35
Music Disk Recorde
r
6
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT
SONG COPY
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT
SONG COPY
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT
SONG COPY
PAUSE
RECORD PLAY
SHIFT
(
LEAD
)
REM.MEM.
(
K.PERC.
) (
LEAD
) (
K.PERC.
)
Separate recording for Lead Voice and/or Keyboard Percussion parts:
The Lead voice and the Keyboard Percussion can be recorded/played
back separately although they are not shown on the M.D.R. panel.
Separate recording for Lead Voice and/or Keyboard
Percussion parts:
Hold down the SHIFT button and simultaneously press the
appropriate button in the top row in the procedure #2 above. The two
buttons (indicated in the illustration at the right) function as Lead
Voice and Keyboard Percussion selectors in the record mode.
■ RECORD/LEAD
Records the performance data of the Lead voice when turned on.
Recording is cancelled when turned off.
■ RECORD/K.PERC
Records the performance data of the Keyboard Percussion when
turned on. Recording is cancelled when turned off. Keyboard
percussion can be recorded/played back independently from
rhythm section.
NOTE:
If you don’t record the Lead Voice and Keyboard
Percussion parts separately, the Lead part will be
recorded as the Upper data and the Keyboard
Percussion part will be recorded as the Lower/
Pedal data.
3
Press the PLAY button, and start playing after numbers appear
in the display. For this example, play the lower keyboard and
pedalboard.
4
Press the STOP button when you are finished with your
performance to stop recording.
Now that you’ve recorded the first parts of your performance.
Press the RECORD button to set up recording of the next part,
Upper part in this case.
5
Press the RECORD button.
In this case, the song (number) contains the performance data of
the Lower and Pedal in addition to the registration and setup
data. The small bars (“--”) appear at the left part of LED display
and flash along with the song number, warning you that the
selected song number already contains recorded data.
6
Press the RECORD button again to record another part (Upper
part).
The RECORD lamp lights up and the PLAY and CUSTOM
PLAY lamps begins blinking, indicating that the Music Disk
Recorder is ready to record.
7
Press the RECORD buttons for each part in the upper left row to
turn off the parts you have already recorded.
In this case, press RECORD/LOWER, RECORD/PEDAL and
RECORD/CONTROL to turn them off.