Filter
Top Products
71
Appendix
9
Problem Possible Cause and Solution
VOICES/RHYTHMS
Pedalboard doesn’t sound, even when its volume The TO LOWER button in the Pedal Voice is turned on. Turn it off.
is properly set.
When keys on the Lower keyboard or pedalboard are Keyboard Percussion function is set to on. Turn the Keyboard Percussion off.
pressed, the sounds of percussion instruments are
also heard.
Reverb
The Reverb effect does not operate, even when The Reverb setting of the targeted voice group is set to 0. When you load the
Reverb volume is increased. data of an upper model to EL-200 and the reverb volume for each voice group
is set to 0. In that data, you cannot get Reverb effect.
Registration Memory
Certain functions have not been memorized to The following functions will not be memorized:
Registration Memory. On/off functions such as Rhythm Start, Synchro Start, Fill-in, Intro./Ending.
MDR select buttons. See page 47 for more information.
An error occurs and the registration data is not Your operation may be wrong or the Write-protect tab of the floppy disk is set
recorded to M.D.R., when executing To Disk to on. Check your operation.
operation.
A simple beep sound is produced when I press the When the contents of the SEQ buttons are different from Electone’s default
Basic Regist. Button. settings (you may have loaded the sequence data from the upper models),
pressing one of the Basic Regist. buttons restores the original data and give a
simple beep sound to notify it.
MUSIC DISK RECORDER
Recording or playback cannot be performed. The PLAY or RECORD section buttons for selecting parts may be turned off.
Turn on the appropriate PLAY or RECORD buttons.
A total of 40 songs cannot be recorded. If some song numbers contain a large amount of recorded data, the disk may
not have enough available memory left to record the normal maximum of 40
songs. Check the remaining memory.
Recording is stopped before the performance is ● The amount of recorded data on the disk is close to the maximum limit.
finished, or the Song Copy function cannot be Either use another disk or delete the data of any unnecessary song number.
executed. ● The length of a subsequently recorded part cannot exceed the length of the
previously recorded parts. If you want to change the song length, first delete
the existing song and record again.
The rhythm does not start at the beginning of a The M.D.R. is designed so that the rhythm cannot be started at the very
recording, or stops in the middle of the performance. beginning of a recording. If you wish to use the rhythm, start it after the
available memory display appears on the M.D.R. display.
The notes of the recording are “stuck” and sound During playback, you removed the disk by pressing the EJECT button.
continuously. Press the STOP button and abort the operation. Whenever you wish to stop
playback, always press the STOP button.