Yamaha EL - 200 Musical Instrument User Manual


 
42
Music Disk Recorde
r
6
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT
SONG COPY
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT
SONG COPY
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT
SONG COPY
3) Pause
If you want to temporarily stop playback of the song or songs, press the
PAUSE button.
To resume playback from the point at which the song was paused, press
the PAUSE button again.
4) Fast Forward and Fast Reverse
During playback, these buttons function as fast forward and fast reverse
buttons, much like those of a tape recorder.
Press SONG SELECT H button to advance to a later point in the song
or press SONG SELECT G button to return to an earlier position.
While either of these buttons is held down, playback stops and the song
time is advanced or reversed accordingly.
Even when the button is released, playback is paused. To resume
playback from the point youve advanced or reversed to, press the PLAY
button.
NOTE:
It may take some time to search the point at which
you want to resume playback when you return to an
earlier position using the fast reverse function.
NOTE:
Fast Forward and Fast Reverse operate at five
times the normal playback speed.
5) Changing the Tempo
You can change the tempo of the song as the song is playing back.
While holding down the SHIFT button, press the TEMPO - or TEMPO +
button.
Each press of the button slows down or speeds up the tempo by a small
amount (not affecting the pitch).
Pressing TEMPO + causes the song faster and TEMPO slower.
(The Tempo dial on the Electone panel cannot be used to change the
tempo on the Music Disk Recorder.)
To restore the original recording tempo of a song, hold down the SHIFT
button and simultaneously press both TEMPO buttons.
Indicates faster tempo
Indicates original tempo
Indicates slower tempo
NOTE:
When tempo is changed, the LED display indicates
the change as a percentage of the original recorded
tempo (100). Values less than 100 indicate a slower
tempo; values greater than 100 indicate a faster
tempo.
NOTE:
Tempo change remains in effect even when you
change songs. If you have changed the tempo in
one song, you should perform above step to restore
the original tempo before playing another song.
Turning the power switch off and on again also
restores the original tempo.