Filter
Top Products
55
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
5 Easy Accompaniment for Other Instruments
B
Select the “Pat” track to
record pattern & section
changes.
Move the cursor to the track area of the display, and then shift the
cursor sideways to select “Pat.” Once selected, move the cursor verti-
cally to move to other areas of the screen. An underline will remain
below the selected track no matter where you move the cursor.
Select “Pat” to record pattern changes.
N
Record.
Press the
[
/
]
key to begin recording pattern changes. The met-
ronome will sound and you’ll be given a two-measure count-in prior
to the first measure actually recorded. The count-in is also indicated
by negative numbers in the “Meas”
parameter. If a 4/4 pattern is se-
lected, for example, the count-in will
run from measure “−08” to “−01”,
then recording will begin from
measure “001”.
m
Realtime recording in progress.
Minus measure numbers during
count-in.