Filter
Top Products
120
T h e S o n g J o b s
10 : Erase Event
Erases all note and event data from the specified measure or range
of measures in the specified track. An erase operation leaves the specified
measures intact but blank.
First beat.
First measure. Last measure.
Last beat.
The “TR” parameter selects the track to be affected by the Erase
Event job: “01” … “16” for the sequencer tracks, the accompaniment
“Pt” track, the accompaniment “Cd” track, or the “Tm” track.
The “M” parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range to be erased.
After setting the parameters as required press [ENTER] to execute
the Erase Event job. The metronome icon will appear on the display while
the data is being processed, then “Completed” will appear briefly when
the job is done. Press the [EXIT] key to return to the job list, or a mode key
to go directly to the selected mode.
■
NOTE
• Unlike the Delete Measure job, the Erase Event job erases the data from the
specified measures only in the specified track. Also, the data is erased but the
measures remain intact (i.e. the subsequent measures are not moved back). After
an erase operation you can record new material in the resulting blank measures as
required.