Filter
Top Products
21
2
P o w e r & C o n n e c t i o n s
Click “OK”.
The “Add Unlisted or Updated Driver” dialog box will
appear.
M With the “Yamaha CBXT3 Serial Driver” highlighted, click
“OK”.
The “Yamaha CBX-T3 Serial Driver Setup” dialog box will
appear.
< Click the desired COM port to select it, then click “OK”.
The System Setup dialog box will appear.
> Click “Restart” to make the added driver effective.
This completes installation of the MIDI driver.
Remember to set the Host Select switch to PC-2 when
you connect your QY70 to an IBM-PC/AT series, or PC-1 when
you connect to an NEC PC-9801/9821 series.
For example, if you inserted the disk in drive A of
an IBM-PC/AT series computer, you should type as
follows:
A:\IBMPC
If you inserted the disk in drive B of an NEC PC-
9801/9821 series, you should type as follows:
B:\NECPC98
N Type in the name of the floppy disk drive where the floppy
disk is inserted, and the name of the directory containing the
driver.