Filter
Top Products
U t i l i t y F u n c t i o n s
226
Move the cursor to the upper parameter and use the [-1] and [+1]
keys to select “Song” if you want to save the data for one song or all
songs, “Style” if you want to save the data for one style or all styles, or
“All” if you want to save all songs, styles, and system setup data.
If you select “Song”, move the cursor to the song number param-
eter and select a song number (01 … 20), or “All” to save all songs.
If you select “Style”, move the cursor to the style number param-
eter and select a style number (U01 … U64), or “All” to save all styles.
Remember all 6 variation patterns(Intro, Main A/B, Fill AB/BA and Ending)
included in one style will be saved at one time.
When the parameters have been set as required, press [ENTER].
“Are you sure?” will appear on the display. Press [+1/YES] to go ahead
with the bulk dump operation, or [-1/NO] to cancel. “Completed!” will
appear when the transmission is finished.
● Bulk Reception of Song & Pattern Data
If no other operation is currently in progress (recording, for example)
the QY70 will automatically receive bulk song and pattern data transmitted
from a compatible external device. If you are using the QY70’s MIDI
connectors rather than the TO HOST connector, make sure that the MIDI
OUT of the external device is connected to the MIDI IN of the QY70.
Select the QY70 SONG play mode when receiving one or all song
bulk data, and select the PATTERN play mode when receiving one or all
style bulk data. “All” data, including all songs, styles and system setup
data, can be received in either the SONG or PATTERN play mode. Remem-
ber that one or all song/style data currently in the QY70’s memory will be
overwritten when one or all song/style bulk data is received. All data in the
QY70’s memory will be overwritten when “All” data is received.
■
NOTE
• See the QY Data Filer’s owners manual if you use the QY Data Filer for bulk dump
reception/transmission.