Filter
Top Products
A p p e n d i x
232
Is Style Number 129 (End Pattern) set in the
middle of the Pattern Track?
Are Play Effect settings being used?
Is the keyboard velocity set between R1 and
R4 (Random)?
Is the Fingered Chord turned off?
Are you pressing keys within the Fingered
Zone?
Is the click set to something other than “off”
in the Utility mode?
Does the beginning of the song contain data
which resets the tone generator?
If there is data in the Pattern track, the
Variation effect settings for the pattern will be
effective.
Press “SHIFT” and “F2” simultaneously to
check the current memory capacity. The
QY70’s memory capacity (approximately
32,000 notes) is for the total data of all songs
and phrases. This means that if there are
songs or phrases that contain large amounts
of data, the memory may be full even though
there are still unused songs or patterns.
Is the Utility mode’s MIDI Echo Back set to
RecMontr? Change the Echo Back setting to
Off or Thru.
When a song is played back,
it stops in the middle.
Rhythm or note timing are
played back differently than
when recorded.
The same amount of force is
used to play notes on the
keyboard but it results in
notes of different loudness.
Cannot use the Fingered
Chord function.
Can’t hear the click sound.
When the song starts, the
voice or effect settings that
you have made disappear.
The “Memory Full” message
appears yet there are still
unused songs.
The QY70 (tone generator) is
slaved to an external
sequencer but, there is no
sound when the performance
is played back from the
external sequencer.
Problem Possible causes
Refer to page
p.54
p.94
p.77, 145
p.43
p.227
p.220
p.192
p.217
p.26
p.223