Filter
Top Products
YDP-223 Detailed Settings – [FUNCTION]
ENGLISH
40
This function conveniently lets you set opera-
tion of the left pedal to one of the modes
listed below.
1. Engage Function mode and select .
2. Press the [+/YES] button to engage the other
functions’ sub-mode, then use the [TEMPO/
FUNCTION# ▼, ▲] buttons to select the
desired sub-mode.
Press the [–/NO] or [+/YES] button to select
the desired pedal function or assign the val-
ues.
Sub-mode
Left Pedal Mode
Setting range:
1. Soft Pedal
The soft pedal reduces the volume and slightly
changes the timbre of notes played while the pedal is
pressed. The soft pedal will not affect notes that are
already playing.
2. Song Start/Stop
This mode allows you to start or stop song playback.
In this mode, the Left Pedal functions in the same
manner as the SONG [START/STOP] button on the
panel.
Normal setting: 1(Soft Pedal)
Soft Pedal Effect Depth
Setting range: 1 – 15
Normal setting: 3
This function sets the depth of the soft pedal effect.
You can change the volume of the metronome
sound.
Use this function to adjust the metronome vol-
ume.
1. Engage Function mode and select .
2. Use the [–/NO] and [+/YES] buttons to set the
metronome volume as required.
Setting range: 1 – 20
Normal setting: 10
This function sets the volume at which a “can-
celed” part is played during preset song play-
back. Adjust the part volume to a comfortable
level and use the “canceled” part as a guide
with which to play along.
1. Engage Function mode and select .
2. Use the [–/NO] and [+/YES] buttons to set the
volume as required.
Setting range: 0 – 20
Normal setting: 5
F4. Other Functions F5 Metronome Volume
TIP
SHORTCUT:
You can jump directly to the metronome functions by
pressing the [TEMPO/FUNCTION#] button while holding the
METRONOME [START/STOP] button.
To exit Function mode, you still need to press the [TEMPO/
FUNCTION#] button so that the TEMPO indicator lights up.
F6. Preset Song Part Cancel Volume