Filter
Top Products
YDP-223 Detailed Settings – [FUNCTION]
ENGLISH
43
Bulk Data Dump
You can save current song data on the YDP-223 as MIDI
bulk data by transferring it to a connected MIDI data
filer (such as an MDF3) or a sequencer. To play back the
saved song data, send the bulk data back from the storage
device to the YDP-223 and follow the usual playback
procedure.
Procedure
1. Record your performance on the YDP-223.
2. Connect the YDP-223 to MDF3, a MIDI data filer via
MIDI, and set up the MDF3 so it will receive bulk
data.
3. Engage Function mode and select .
4. Press the [+/YES] button to begin bulk transmission.
will appear on the LED display when the data has
been successfully transmitted.
TERMINOLOGY
bulk data:
A complete set or extended sequence of data
NOTE
No MIDI note/panel data transmission or data reception
occurs during a bulk data dump transmit operation.
TIP
Receiving (returning) the transmitted data:
1. Connect the YDP-223 via MIDI to the device to which the
data was previously transmitted.
2. Start sending the data from the device.
The YDP-223 automatically receives the data from the unit.
(At this time, any data previously stored in the YDP-223 will
be erased.)
Then, follow the usual playback procedure.
(For the data to be accepted, the YDP-223 that receives the
data should be the same model as the one from which the
data was once transmitted to the MIDI data filer.)
NOTE
The reload operation cannot be executed when Demo/Preset
Song mode or the user song recorder is in operation, or
when Function mode is engaged.
TIP
For more information on transmitting and receiving bulk data
via MIDI, refer to the owner’s manual for the connected MIDI
device.