Filter
Top Products
YDP-223 Detailed Settings – [FUNCTION]
ENGLISH
44
However, the backup settings themselves, and the con-
tents of the user song recorder memory, are always
backed up.
CAUTION
Even if the backup function is turned on via one of the
functions described below, the data will be retained in
memory for only about one week if the power is not
turned on during this time. If the backup period is
exceeded, all settings will be reset to their default values.
If you want to retain the backup settings for longer peri-
ods, be sure to turn the power on for a few minutes at
least once a week.
You can turn the backup function on or off for
each function group (each of the following
sub-mode functions).
1. Engage Function mode and select .
2. Press the [+/YES] button to engage the
backup function’s sub-mode, then use the
[TEMPO/FUNCTION# ▼, ▲] buttons to select
the desired sub-mode.
Press the [–/NO] or [+/YES] button to turn the
backup function on or off.
Sub-mode
Voice
MIDI
Tuning
Others
Setting range: ON/OFF
Normal setting: OFF (all groups)
Description of sub-modes
F8.1: Voice
•Voice (Keyboard and Dual)
•Dual (ON/OFF, Voice, and Dual Functions for each
voice combination)
•Reverb (ON/OFF, Type, and Depth for each voice)
• Effect (ON/OFF, Type, and Depth for each voice)
•Touch Sensitivity (including the FIXED volume)
•Metronome (Beat, Volume < settings>)
•Preset Song Part Cancel Volume ( settings)
F8.2: MIDI
The MIDI functions ( settings)
(expect for the )
F8.3: Tuning
•Transpose
•Tuning ( settings)
• Scale (including base note) ( settings)
F8.4: Others
Other functions ( settings)
Factory Preset Recall
All Dual mode, reverb, effect, touch sensitivity, tuning
settings, and the settings affected by the Backup Func-
tions can be restored to their original factory preset val-
ues by holding the C7 key (right-most key on the
keyboard) while turning the [POWER] button ON. This
also erases all user song recorder data, and sets all backup
on/off settings (F8) to “OFF”. (The factory setting list is
found on page 60.)
F8. Backup Functions
TERMINOLOGY
Backup:
You can back up some settings, such as voice selection and
reverb type, so that they will not be lost when you turn off the
power to the YDP-223.
If the backup function is turned on, the settings at power off
are effective. If the backup function is turned off, the settings
in memory are erased when you turn off the power. In this
case, when you turn on the power to the unit, the default set-
tings (the initial settings) will be used. (The factory setting
default list is found on page 60.)