A SERVICE OF

logo

Open as PDF
next previous
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration en | 386
47.3 Actions
47.3.1 Introduction
The action determines which action is triggered if the
control input or key becomes active. The behavior that
can be assigned to a control input or key, depends on
the action type, since some combinations of actions and
behaviors are not useful (see section 47.3.2).
Note
The Action programming pages for a call station
basic or call station toolkit always contain a
General section and up to 16 Keypad sections.
In the General section, the properties of the PTT
key of the call station can be defined. This key
always has the Press-to-talk (PTT) action.