A SERVICE OF

logo

Configuration Menu 125
Address Resolution Protocol configuration
Command: /cfg/l3/arp
[ARP Menu]
rearp - Set re-ARP period in minutes
cur - Display current ARP configuration
Address Resolution Protocol (ARP) is the TCP/IP protocol that resides within the Internet layer. ARP resolves a physical
address from an IP address. ARP queries machines on the local network for their physical addresses. ARP also
maintains IP to physical address pairs in its cache memory. In any IP communication, the ARP cache is consulted to
see if the IP address of the computer or the router is present in the ARP cache. Then the corresponding physical
address is used to send a packet.
The following table describes the ARP Configuration Menu options.
Table 125 ARP Configuration Menu options
Command Description
rearp <2-120>
Defines re-ARP period in minutes. You can set this duration between two and 120 minutes.
cur Displays the current ARP configurations.
IP Forwarding configuration
Command: /cfg/l3/frwd
[IP Forwarding Menu]
dirbr - Enable/disable forwarding directed broadcasts
on - Globally turn IP Forwarding ON
off - Globally turn IP Forwarding OFF
cur - Display current IP Forwarding configuration
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the IP Forwarding Configuration Menu options.
Table 126 IP Forwarding Configuration Menu options
Command Description
dirbr disable|enable
Enables or disables forwarding directed broadcasts. This command is disabled
by default.
on
Enables IP forwarding (routing) on the GbE2c.
off
Disables IP forwarding (routing) on the GbE2c. Forwarding is turned off by
default.
cur Displays the current IP forwarding settings.
Network Filter configuration
Command: /cfg/l3/nwf <1-256>
[IP Network Filter 1 Menu]
addr - IP Address
mask - IP Subnet mask
enable - Enable Network Filter
disable - Disable Network Filter
delete - Delete Network Filter
current - Display current Network Filter configuration
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.