Configuration Menu 93
The following table describes the SSHD Configuration Menu options.
Table 80 SSHD Configuration Menu options
Command Description
intrval <0-24> Defines interval for auto-generating the RSA server key. The switch will
auto-generate the RSA server key at the interval defined in this command.
The value of zero (0) means the RSA server key auto-generation is
disabled. If the switch has been busy performing any other key generation
and the assigned time of interval expires, the RSA server will skip
generating the key.
scpadm Defines the administrator password that is for Secure Copy (SCP) only. The
username for this SCP administrator is scpadmin.
Typically, SCP is used to copy files securely from one machine to another.
In the switch, SCP is used to download and upload the switch configuration
using secure channels.
hkeygen Generates the RSA host keys manually. The switch creates this key
automatically while configuring the switch with Secure Shell (SSH). But you
can generate the key manually by using this command if you need to
overwrite the key for security reasons. The command will take effect
immediately without executing the apply command.
skeygen Generates the RSA server key. The switch creates this key automatically
while configuring the switch with Secure Shell (SSH). You can generate the
key manually by using this command if you need to overwrite the key for
security reasons. The command will take effect immediately without
executing the apply command.
sshport <TCP port number> Sets the SSH server port number.
ena Enables the SCP apply and save.
dis Disables the SCP apply and save. This is the default for SCP.
on Enables the SSH server.
off Disables the SSH server. This is the default for the SSH server.
cur Displays the current SSH server configuration.
RADIUS server configuration
Command: /cfg/sys/radius
[RADIUS Server Menu]
prisrv - Set primary RADIUS server address
secsrv - Set secondary RADIUS server address
secret - Set primary RADIUS server secret
secret2 - Set secondary RADIUS server secret
port - Set RADIUS port
retries - Set RADIUS server retries
timeout - Set RADIUS server timeout
telnet - Enable/disable RADIUS backdoor for telnet/ssh/http/https
secbd - Enable/disable RADIUS secure backdoor for telnet/ssh/http/https
on - Turn RADIUS authentication ON
off - Turn RADIUS authentication OFF
cur - Display current RADIUS configuration
NOTE: See the HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Application Guide for information on
RADIUS.
