Configuration Menu 151
ACL Re-mark In-Profile configuration
Command: /cfg/acl/acl <1-762>/re-mark/inprof
[Re-marking - In Profile Menu]
up1p - Set Update User Priority Menu
updscp - Set the update DSCP
reset - Reset in profile settings
cur - Display current settings
Table 166 ACL Re-mark In-Profile Configuration Menu options
Command Description
up1p
Displays the Re-Mark In-Profile Update User Priority Menu.
updscp <0-63>
Sets the DiffServ Code Point (DSCP) of In-Profile packets to the selected value.
reset
Resets the update DSCP parameters to their default values.
cur Displays the current ACL re-mark in-profile parameters.
ACL Re-mark In-Profile Update User Priority configuration
Command: /cfg/acl/acl <1-762>/re-mark/inprof/up1p
[Update User Priority Menu]
value - Set the update user priority
utosp - Enable/Disable use of TOS precedence
reset - Reset in profile up1p settings
cur - Display current settings
Table 167 ACL Update User Priority Configuration Menu options
Command Description
value <0-7>
Defines 802.1p value. The value is the priority bits information in the packet
structure.
utosp enable|disable
Enable or disable mapping of TOS (Type of Service) priority to 802.1p priority
for In-Profile packets. When enabled, the TOS value is used to set the 802.1p
value.
reset
Resets UP1P settings to their default values.
cur Displays the current ACL Update User Priority parameters.
ACL Re-mark Out-of-Profile configuration
Command: /cfg/acl/acl <1-762>/re-mark/outprof
[Re-marking - Out Of Profile Menu]
updscp - Set the update DSCP
reset - Reset out of profile settings
cur - Display current settings
Table 168 ACL Re-mark Out-of-Profile Configuration Menu options
Command Description
updscp <0-63>
Sets the DiffServ Code Point (DSCP) of Out-of-Profile packets to the selected
value. The switch sets the DSCP value on Out-of-Profile packets.
reset
Resets the update DSCP parameters for Out-of-Profile packets to their default
values.
cur Displays the current ACL re-mark out-profile parameters.
