Configuration Menu 130
RIP Route Redistribution configuration
Command: /cfg/l3/rip/redist fixed|static|ospf|eospf
[RIP Redistribute Fixed Menu]
add - Add rmap into route redistribution list
rem - Remove rmap from route redistribution list
export - Export all routes of this protocol
cur - Display current route-maps added
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the RIP Route Redistribute Menu options.
Table 133 RIP Redistribute Configuration Menu options
Command Description
add <1-32> <1-32>|all
Adds selected routing maps to the RIP route redistribution list. To add all the 32
route maps, enter
all. To add specific route maps, enter routing map numbers
one per line, NULL at the end.
This option adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution list
will be redistributed.
remove <1-32> <1-32>|all
Removes the route map from the RIP route redistribution list.
Removes routing maps from the list. To remove all 32 route maps, enter
all.
To remove specific route maps, enter routing map numbers one per line, NULL
at end.
export <1-15>|none
Exports the routes of this protocol in which the metric and metric type are
specified. To remove a previous configuration and stop exporting the routes of
the protocol, enter
none.
cur Displays the current RIP route redistribute configuration.
Open Shortest Path First configuration
Command: /cfg/l3/ospf
[Open Shortest Path First Menu]
aindex - OSPF Area (index) Menu
range - OSPF Summary Range Menu
if - OSPF Interface Menu
virt - OSPF Virtual Links Menu
md5key - OSPF MD5 Key Menu
host - OSPF Host Entry Menu
redist - OSPF Route Redistribute Menu
lsdb - Set the LSDB limit for external LSA
default - Export default route information
on - Globally turn OSPF ON
off - Globally turn OSPF OFF
cur - Display current OSPF configuration
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
