© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-811DRU
57
Check the router system information
Administrator > Status
You may want to check the system information of your router such as WAN (Internet)
connectivity, wireless and wired network settings, router MAC address, and firmware
version.
1. Log into your router management page (see “Access your router management page
”
on page 31).
2. Click on Administrator and click on Status.
System Info
• Firmware Version – The current firmware version your router is running.
• System Time: The current time set on your router.
• Router Up Time – The duration your router has been running continuously
without a restart/power cycle (hard or soft reboot) or reset.
Internet Configurations
• Connected Type: The WAN connection type applied on your router.
• IP Address – The current IP address assigned to your router WAN port or
interface configuration.
• Subnet Mask - The current subnet mask assigned to your router WAN port or
interface configuration.
• Default Gateway – The current gateway assigned to your router WAN port or
interface configuration.
• DNS (Domain Name System) – The current DNS address(es) assigned to your
router port or interface configuration.
• Renew (DHCP WAN Type): Click this option to renew your WAN IP address.
• Release (DHCP WAN Type): Click this option to release the WAN IP address of
your router.
• Connect (PPPoE WAN Type): Click this option to connect to your DSL ISP
• Disconnect (PPPoE WAN Type): Click this option to disconnect from your DSL ISP.
