A SERVICE OF

logo

Open as PDF
next previous
60133 revG Page 11 of 38
6. Unbolt spring loaded bolts that connects the stock catalytic converter to the down pipe. SEE FIGURE 18
FIGURE 18
7. Save the exhaust crush ring gasket, this will be used when installing the new supplied down pipe.
8. Remove the five bolts that hold the stock exhaust manifolds to the head with a 12mm wrench. SEE
FIGURE 19
FIGURE 19
Stock Intake Disassembly
1. Unplug the mass air sensor and remove the two Phillips screws that mounts the sensor to the factory air
box. SEE FIGURE 20
FIGURE 20