A SERVICE OF

logo

Open as PDF
next previous
60133 revG Page 8 of 38
2. Using a small flat head screwdriver, carefully insert the screwdriver in the indented slot on the plastic trim
clip and pry upwards. SEE FIGURES 6, 7, & 8
FIGURE 6 FIGURE 7
FIGURE 8
3. Remove front fasica by pulling it forward
4. Remove foam bumper reinforcement. SEE FIGURE 9
FIGURE 9
5. Remove plastic air dams on each side of the vehicle. Air dams are secured to the vehicle with the plastic
trim clips that can easily be removed by using a flat head screwdriver. SEE FIGURE 10