60133 revG Page 3 of 38
TORQUE RECOMMENDATION: When removing and re-installing factory fasteners, refer to the Toyota / Scion
service manual for torque values. When installing fasteners included in this kit, refer to the following chart:
Fastener
Size
Torque
(Pound-Feet)
Torque
(Newton-Meters)
1/4" or 6mm 10 13
5/16” or 8mm 19 25
3/8” or 10mm 33 45
NPT fittings 2-3 turns past finger tight
TURBOCHARGER SYSTEM PARTS LIST:
QTY P/N DESCRIPTION P/N 15152
1 11118 Turbocharger, E50 / Stg.2 / Ball Bearing X
1 5-340 Air to Air Intercooler, Spearco X
1 10781 Wastegate, Evolution X
1 10843 Blow-off Valve, Raptor X
1 11124 Hardware Kit, Nuts / Bolts / Fittings / Misc. X
1 11126 Hardware Kit, Fuel Components X
1 21239 Tube, Turbocharger to Intercooler X
1 21240 Tube, Intercooler to Throttle Body – 1 X
1 21241 Tube, Intercooler to Throttle Body – 2 X
1 21242 Tube, Intercooler to Throttle Body – 3 X
1 21238 Tube, Air filter to Turbocharger X
1 21243 Tube, Exhaust, Downpipe X
1 21279 Manifold, Exhaust X
1 31040 Heat Shield, Tangential T3 housing X
1 31080 Air Filter, AEM Dry-Flow, 3.0” Inlet X
1 21286 Fuel Controller, UniChip X
1 60133 Install Instructions X
