Filter
Top Products
Chapter 3: Connections
Connect a BNC-to-BNC cable (such as the Alesis BN cable) between the BRC’s 48
kHz CLOCK OUT and the QS’s [48 KHZ IN]. Set the Clock function to either Ext
48kHz if the BRC is set to 48kHz, or Ext 44.1k if the BRC is set to 44.1kHz. For more
information about the Clock function, see page 119 in Chapter 8.
Tip: With this type of connection, the ADAT tracks will remain in tune with the QS
even when the BRC’s pitch value is adjusted.
Note: When using only one or more ADATs without the BRC, it is not necessary to
connect the 48 kHz Clock.
26 QS7/QS8 Reference Manual