Filter
Top Products
24
Chapter 3 Saving the Tones You Have Created
Exchanging Patches
On the GT-6B, you can exchange the positions of two User
patches.
fig.03-05
1. Select the exchange-source patch (refer to “How to
Switch Patches”; p. 14).
2. Press [WRITE].
3. Press PARAMETER [ ].
The content of the display changes, and the GT-6B is
ready for a User patch to be specified as the exchange
destination.
fig.03-06
4. Rotate the VALUE dial to select the exchange-
destination User patch.
* To cancel the exchange, press [EXIT]. The Play screen returns
to the display.
5. Press [WRITE] once more.
The tone stored in the exchange-source patch and the
tone stored in the exchange-destination patch are
exchanged, and you’re returned to the Play screen.
4
2,5
3
Destination Patch