Filter
Top Products
E-14
Power Supply
You can power this digital piano by plugging it into a
standard household power outlet.
Be sure you turn off power and unplug the power cord from
the electrical outlet whenever the digital piano is not in use.
Using the AC Adaptor
Make sure that you use only the AC adaptor specified for
this digital piano.
Specified AC Adaptor: AD-12
[Left Side Panel]
Note the following important precautions to avoid damage
to the power cord.
● During Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or connector.
• The power cord should not be stretched tight while it is in
use.
● During Movement
• Before moving the digital piano, be sure to unplug the AC
adaptor from the power outlet.
● During Storage
• Loop and bundle the power cord, but never wind it around
the AC adaptor.
IMPORTANT!
• Make sure that the digital piano is turned off before
connecting or disconnecting the AC adaptor.
• Using the AC adaptor for a long time can cause it to
become warm to the touch. This is normal and does not
indicate malfunction.
AC adaptor AD-12
AC outlet
DC 12V jack
Turning Off the Digital Piano
• Be sure to press the POWER button to turn off power and
make sure that the LCD backlight is off before disconnecting
the AC adaptor or doing anything else.
• Never disconnect the AC adaptor while the digital piano is
turned on or try to turn off power using any other technique
besides pressing the POWER button. Doing so can cause
the contents of the digital piano’s Flash memory to become
corrupted. Strange digital piano operation and abnormal
startup when power is turned on are symptoms of
corrupted Flash memory contents. See “Troubleshooting”
on page E-89 for more information.
IMPORTANT!
• While the following message is on the display, never
turn off the digital piano by pressing the POWER button,
disconnecting the AC adaptor, etc.
(message) “Pls Wait” or “Bulk In”
Turning off the digital piano while the above message is
on the display can cause user data (user tones, song
memory data, etc.) currently stored in digital piano
memory or on SD memory cards to become corrupted.
Once corrupted, you may not be able to recall the data
again.
Memory Contents
Settings
Tone, rhythm, and other “main digital piano settings” in effect
when you turn off the digital piano manually by pressing
POWER button are still in effect the next time you turn power
back on.
Main Digital Piano Settings
Tone number, layer, split, split point, drawbar organ tone
settings, transpose, tuning, and contrast settings, touch
response, reverb, chorus, DSP, equalizer, rhythm number,
tempo, keyboard channel, MIDI In Chord Judge on/off,
accomp MIDI out on/off, soft/sostenuto pedal jack
setting, accompaniment volume, user area tones
(Synthesizer Mode), user area accompaniments, user
DSP area, pitch bend range, Auto Harmonize on/off,
Auto Harmonize type, Mixer hold, DSP hold, Auto
Accompaniment mode, all Mixer parameters, all
Synthesizer Mode parameters, Song Memory song
numbers, SMF player settings (play mode, manual play
part, SMF playback volume), microphone echo on/off