Filter
Top Products
E-24
Recording Your Keyboard Play
3.
Start recording.
• For details about how to do this, see “Starting and
Stopping Recording” in “Operations Common to All
Modes” (page E-12).
• This will start recording to the USB flash drive. The
message “Audio Recording . . .” will appear on the
display.
NOTE
• Do not remove the USB flash drive from the USB
flash drive port while the AUDIO RECORDER
button lamp is lit or flashing. Doing so will interrupt
recording and may corrupt data.
• To exit the Audio Recorder, press the
er
(AUDIO
RECORDER) button the required number of times
until its lamp goes out.
To record keyboard play while playing
back a phrase or song
1.
Select the phrase or song you want to play
back.
• Phrase: Perform steps 1 through 3 under “Listening
to a Phrase” (page E-20).
• Song: Perform steps 1 and 2 under “To play back a
song” (page E-22).
2.
Press the
er
(AUDIO RECORDER) button
the required number of times until the button
lamp starts to flash.
3.
Start recording.
• For details about how to do this, see “Starting and
Stopping Recording” in “Operations Common to All
Modes” (page E-12).
• At the point where you want to start phrase or song
playback while recording, press the
cr
(START/
STOP) button.
• To turn off playback and continue recording, press
the
cr
(START/STOP) button again.
4.
To stop recording, press the
cs
(RECORD)
button.
• The
cs
(RECORD) button lamp will go out to let you
know that audio recording is stopped. Phrase/song
playback also will automatically stop at this time.
• To exit the Audio Recorder, press the
er
(AUDIO
RECORDER) button the required number of times
until the button lamp goes out.
NOTE
• A MIDI file (SMF) cannot be played back during
recording.
To play back performance data recorded
on a USB flash drive
1.
Press the
er
(AUDIO RECORDER) button
the required number of times until the button
lamp is lit.
This will display the audio file selection screen.
2.
Use the
eo
(–, +) buttons to select a song.
• The
eo
(–) button scrolls through the recorded songs
in order from the newest (most recently recorded) to
the oldest.
• The
eo
(+) button scrolls from the old to the new.
3.
Start playback.
• For details about how to do this, see “Starting and
Stopping Playback” in “Operations Common to All
Modes” (page E-11).
• To scroll back, hold down the
cm
(SONG) button as
you press the
cn
(REW) button. To scroll forward,
hold down the
cm
(SONG) button as you press the
co
(FF) button. This operation can be performed only
while an audio file is playing back.
• You can pause playback by holding down the
cm
(SONG) button as you press the
cp
(PAUSE) button.
This operation can be performed only while an audio
file is playing back.
• A MIDI file (SMF) and audio file cannot be played
back simultaneously.
• To exit the Audio Recorder, press the
er
(AUDIO
RECORDER) button the required number of times
until its lamp goes out.