Filter
Top Products
E-7
English
Connections
IMPORTANT!
• Before connecting headphones, be sure to use the
Digital Piano’s VOLUME controller to turn the
volume down to a low level. After connecting, you
can adjust the volume to the level you want.
Back
Connect commercially available headphones to the
PHONES jacks. To protect your hearing, make sure
that you do not set the volume level too high when
using headphones.
NOTE
• Be sure to push the headphones plug into the
PHONES jacks as far as it will go. If you don’t, you
may hear sound from only one side of the
headphones.
• If the plug of the headphones you are using does not
match the PHONES jacks, use the applicable
commercially available adaptor plug.
Your Digital Piano has two pedal terminals.
A variety of different functions can be assigned to a
pedal.
• Under initial factory settings, the damper pedal*
function is assigned to DAMPER/PEDAL1.
* Pressing the damper pedal while playing causes
notes you play on the keyboard to be sustained
longer.
Whenever a piano tone is selected, pressing this
pedal will activate the Digital Piano’s Damper
Resonance effect, which causes notes to resonate
in the same way they do when the damper pedal
on an acoustic piano is pressed.
• For details, see the separate “Tutorial”.
To connect to the pedal jack
Depending on the type of operation you want the
pedal (SP-3) to perform, connect the pedal’s cable
either to the Digital Piano’s DAMPER/PEDAL1 jack or
PEDAL2 jack. If you want to use both operations
(jacks) at the same time, you need to purchase another
optionally available pedal.
Back
Connecting Headphones
PHONES jacks
Commercially
available headphones
Standard plug
Connecting a Pedal
DAMPER/PEDAL1, PEDAL2 jacks
SP-3