E-4
General Guide
Your Digital Piano lets you save its current settings,
and lock its buttons to protect against operation errors.
For details, see “Auto Resume” (page E-27) and “Panel
Lock” (page E-27).
Perform either of the following two procedures when
you want to return the Digital Piano’s stored data and
settings to their initial factory defaults.
■ Method 1
1.
Hold down the
bk
(P) button to turn off the
Digital Piano.
• For details, see “Turning Power On or Off” (page
E-6).
2.
While holding down the
dq
(4) button and
en
(NUM KEY), press the
bk
(P) button.
Keep the
dq
(4) and
en
(NUM KEY) buttons
depressed until the message “INITIALIZING”
appears on the display.
After initialization is complete, display contents return
to normal.
■ Method 2
1.
Press the
bm
(SYS SETTING) button.
2.
Use the
dt
(w) and
ek
(q) buttons to select
“Initialize”.
3.
Use the
ds
(u),
dt
(w),
ek
(q), and
el
(i) buttons to select “Initialize All”.
4.
Press the
em
(ENTER) button.
This will display a confirmation message “SURE?”.
• If you want to cancel the initialization, press the
eo
(NO) or
dr
(EXIT) button.
5.
Press the
eo
(YES) button to initialize.
The message “Please Wait” will remain on the display
while the operation is being performed. Do not perform
any operation while this message is on the display.
“Complete” appears on the display after initialization is
complete.
You can download a separate tutorial manual from the
CASIO website below.
http://world.casio.com/
Saving Settings and Using
Panel Lock
Returning the Digital Piano to
Its Factory Default Settings
Separate Tutorial Manual
B