Filter
Top Products
Operation ~ Telco Interface
34
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
The input is now muted. To unmute the input, follow the same procedure, but select
Off to deactivate the mute function.
To mute or unmute an output
1. Press the Outputs button, then scroll to the desired output channel. Press
Enter.
2. Scroll through the output parameters until you see Mute. Press Enter.
3. Use the ▲ and ▼ buttons to select On, then press Enter.
The output is now muted. To unmute the output, follow the same procedure, but
select Off to deactivate the mute function.
To make and disconnect a call
1. Open AP-Ware and select the AP400 unit.
2. Click the AP400 Telco button on the Flow Screen to open the AP400 Telco
interface.
Detailed instructions on
creating site files and
using AP-Ware can be
found in the AP-Ware help file.
✍
Figure 4.1. Telco interface
Telco Interface