Filter
Top Products
Appendices ~ Appendix E: Serial Commands
51
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
FLOW
This command selects or reports whether hardware flow control is
enable or disabled for the AP400. Hardware flow control is
implemented using RTS and CTS.
[DEVICE] FLOW <X>
Explanation
<X>
X=0 Sets flow control to OFF
X=1 Sets flow control to ON
X=Null Parameter to return the current mode
Return Values
The command will return the updated condition (On=1, Off=0) of
the AP400 in the same format as the command.
FMP
This command selects or returns the current status of the first
microphone priority mode for the AP400.
[DEVICE] FMP <X>
Explanation
<X>
X=0 Parameter to select first microphone priority
mode to OFF
X=1 Parameter to select first microphone priority
mode to ON
X=Null Parameter to return the current mode
Return Values
The command will return the updated condition (On=1, Off=0) of
first mic priority mode in the same format as the command.
FPP
This command sets and reports the current passcode setting
for the AP400.
[DEVICE] FPP <XXXXX>
Explanation
<XXXXX>
X=1 ▲ button
X=2 Enter button
X=3 Esc button
X=4 ▼ button
X=5 Meter button
X=6 Input button
X=7 System button
X=8 Output button
X=9 Routing button
X=Null Parameter to return current passcode
Return Values
The command returns the current or updated condition of the
front panel passcode.