Filter
Top Products
Operation ~ Utilities
72
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
G-Ware Switcher
G-Ware Switcher allows you to alternate between different G-Ware software versions
that are installed on the same PC.
For example, if you need to upgrade the firmware on your ClearOne unit(s),
G-Ware Switcher allows you to easily switch to an earlier version of G-Ware (such
as 3.5), save the site files, and then switch to a later version (4.5) to upgrade the
firmware.
Prior to the 4.5 release, the older version of G-Ware had to be removed
before the new version could be installed.
Before using G-Ware Switcher
1. Load G-Ware 3.5 in a unique directory (path), as shown in Figure 5.14. Do
not select “Add Icon to Desktop” when you are asked if you want to do so
during the installation process.
2. Load G-Ware 4.5 in a unique directory (path), as shown in Figure 5.15. Do
not select “Add Icon to Desktop” when you are asked if you want to do so
during the installation process.
You are now ready to use G-Ware Switcher.
To use G-Ware Switcher
1. Launch G-Ware Switcher from the Windows Start menu by selecting
Programs, ClearOne G-Ware, and then G-Ware Switcher.
The G-Ware Switcher Utility Window opens. G-Ware Switcher
automatically searches the PC for G-Ware software versions and displays
them in the window.
2. Select the G-Ware version you want to use.
3. If the selected G-Ware version is active (if Yes appears in the Active column
for the version you want to run), click Run to launch it.
Figure 5.16. G-Ware Switcher
Figure 5.14. Creating a
directory for G-Ware 3.5
Figure 5.15. Creating a
directory for G-Ware 4.5