Filter
Top Products
4. Mount the receiver housing to the
surface.
If not using a raceway:
Mount the receiver housing and base to the surface, using
the appropriate screws for the type of surface. (Screws
and wall anchors are not included.)
If using a raceway:
a. Position the receiver housing with the raceway
inserted through the knockout.
b. Mount the receiver housing and base to the surface,
using the appropriate screws for the type of surface.
(Screws and wall anchors are not included.)
Ü
Mount the receiver housing to the
mounting surface using screws.
á
If using a raceway, insert the
raceway through the knockout, then
mount the housing.
VoiceLift Microphone Installation • Installation — Stage 1
2-8
Installation — Stage 1, cont’d