Filter
Top Products
O
N
12
CTS-2
O
N
1 2
CTS-2
MIX
TONE
RS-232
AUX IN
CTC
+
OUTIN
RLY
Tx
IN
Rx
C
NO
MIX
TONE
Base Plate
Ö
Locate the arrow on the housing rim.
Ñ
Locate the locking tab marked with the
arrow.
2. Connect the cables to the receiver
(continued).
b. Install any optional devices and connect their cables to
the appropriate ports on the receiver base.
c. If desired, set the Tone and Mix DIP switches on the
receiver base.
• Mix (1): Up = Mix auxiliary input and microphone
together on microphone output.
Down = Output the microphone and aux
input separately (default).
• Tone (2): Up = Enable the microphone volume change
alert tone (default).
Down = Disable the microphone volume
change alert tone.
3. Attach the receiver dome to the
housing.
a. Locate the locking tab on the receiver dome that contains
an arrow etched into its surface.
b. Locate the arrow on the rim of the receiver housing.
É
Set the Tone and Mix DIP switches
(optional).
2-11
VoiceLift Microphone Installation • Installation — Stage 2