Fostex VM08 Musical Instrument User Manual


 
20
Model VM08 Owner’s Manual
Name Parameter type Explanation
29 MonoDELAY DELAY Mono delay
30 PanDELAY DELAY Panning delay
31 MonoBpmDL BPM DELAY Mono delay. Specify BPM and note value to set the delay time.
32 PanBpmDL BPM DELAY Panning delay. Specify BPM and note value to set the delay time.
33 Short DL SHORT DELAY Short delay that allows you to set the delay time precisely.
34 DOUBLING DOUBLING Doubling that allows you to set separate delay times for L and R.
35 CHORUS CHORUS Produces a chorus effect. A doubling effect can also be added.
36 FLANGE FLANGE Produces a flanging effect.
37 MonoPITCH MONO PITCH Pitch shift adjustable in a +/-2 octave range.
38 DlyPITCH DELAY PITCH Pitch shift with a feedback delay, allowing strange effects to be produced.
EQ
1
~
28
Effect types preset for EFF 2
1--28 are the same effect types as the EFF 1 presets listed on the preceding page. (For details refer to the preceding page.)
Selecting the effect type
Here's how to select the effect type for EFF 1 or EFF 2.
Press this to set the effect type
for EFF 1.
Press this to set the effect type
for EFF 2.
* As described earlier in "Normal mix mode," raise the INPUT fader of a channel to which a
signal is being input and raise the MASTER fader, so that the sound is heard at an appropriate
level.
* As described earlier in "Setting the effect send level," raise the EFF 1 SEND level or the EFF 2
SEND level for the channel(s) to which you wish to apply the effect.
1.If you wish to set EFF 1, press the EFF EDIT
mode EFF 1 key. To set EFF 2, press the EFF 2
key.
With the initial settings, the following displays
will appear.
When the EFF 1 key is pressed:
With the initial settings, [Norm HALL] will ap-
pear.
When the EFF 2 key is pressed:
With the initial settings, [CHORUS] will appear.
2.Use the DATA encoder to select the effect type.
The effect types listed in the foregoing tables
will appear in succession. When an effect type
appears, it will be blinking. The blinking indi
cates that the effect type has not yet been
selected.