Filter
Top Products
3
Model VM08 Owner’s Manual
Power Supply
* When unplugging the AC adaptor from the
outlet, be sure to grasp the adaptor.
Attempting to unplug it by pulling on the
AC cable may damage the wiring.
* It is dangerous to use any power cable that
is cut or frayed. If the power cable is
damaged, immediately stop using it, and
have it repaired.
* Do not plug in or unplug the AC adaptor
with wet hands. Doing so may result in
dangerous electric shock.
* Do not open the unit or touch any parts
inside. Doing so may result in a
dangerous electric shock, and could
damage the unit.
* Do not let water or other liquids,
flammable materials, or metal objects such
as pins get in side the unit.
These things may cause electric shock or
short circuit the VM08, and damage it.
If the VM08 should become wet, unplug
the AC adaptor from the AC outlet, and
contact your authorized service station.
Location
Avoid using the VM08 in the following
locations:
* Locations of extreme low or high tempera-
tures, or extreme changes in temperature.
* Locations with excessive moisture or dust.
* Locations where direct sunlight falls for an
extended time, or near a stove or other
source of heat.
* Locations where electrical voltage varies.
* Unstable locations or where there is heavy
vibration.
* Near strong magnetic fields (on top of a
television or speaker).
Precautions (please read before use)Table of Contents
Precautions............................................3
Names and Functions...........................4
Before Operation...................................6
Remove the insulation paper.......................6
Caution when powering ON.........................6
Reset of VM08.................................................6
Internal battery for the memory back up...6
Peripheral Equipment Connection.....7
Application Examples...........................9
Initial State of the VM08.......................11
Normal Mix Mode.................................12
Channel Parameter Edit Mode..........14
Setup method for PAN setting....................14
EQ setup method..........................................15
Setup method of the effect send level.......15
Setup method of the aux send level..........16
PRE/POST setup method............................17
Effect Edit Mode...................................18
About the effect types.................................19
Selecting the effect type..............................20
Effect parameter settings............................21
Muting an effect...........................................21
Effect parameter details..............................22
Scene Memory Mode..........................24
Storing a scene memory.............................24
Recalling a scene memory..........................24
Level adjust..................................................25
Fader adjust.................................................25
Directly recalling a scene memory...........26
Clearing a scene memory...........................26
Setup Mode..........................................27
Making settings in setup mode..................27
Details of the setup menu...........................27
Input 5/6 input setting...................................27
Input 7/8 input setting...................................27
Fader fix setting...............................................28
Channel fader recall setting...........................28
Master fader recall setting..............................28
Foot switch setting...........................................28
Battery check....................................................28
Specifications......................................29