Filter
Top Products
28
17. ROTARY 1 rate slow/fast wet balance
18. ROTARY 2 rate slow/fast drive
19. AUTO WAH sense 0 -100 (%) wet balance
20. PEDAL WAH sense 0 -100 (%) wet balance
21. ENHANCER intensity 0 -100 (%) send level
22. OVERDRIVE drive 0 -100 (%) wet balance
REVERB parameter list
REVERB Time REVERB Depth
1. HALL 1 rev.time 0.3 - 5.0S send level
2. HALL 2 rev.time 0.3 - 5.0S send level
3. STAGE 1 rev.time 0.3 - 3.0S send level
4. STAGE 2 rev.time 0.3 - 3.0S send level
5. ROOM 1 rev.time 0.3 - 3.0S send level
6. ROOM 2 rev.time 0.3 - 3.0S send level
7. PLATE rev.time 0.3 - 3.0S send level
Note:
When EFX/REVERB depth is set to 0 while the EFX/REVERB button is active,
the EFX/REVERB button will blink to indicate that the EFX/REVERB is turned
ON but the depth is set to 0.
EFX rate and REVERB time are effective to internal zone only.
If the selected zone is set to BOTH, changing the value for EFX depth or REVERB
depth affects for both internal and external sections. If you want different
settings for internal and external sections, first enter the edit mode by pressing
the MENU button and press the EFFECT button. Now you can select internal
or external zone with ZONE SELECT button. (See page33 for details.)
Quick Change Reverb Offset
Press and hold the EFFECT button. The EFFECT button starts blinking
and the following screen for Reverb Offset (See page47) will be shown until the
button is released.
This parameter is stored automatically when leaving the screen, there is no
need to store the setting manually.