Filter
Top Products
47
8.2.3 System Tuning
This parameter sets the global master tuning of the MP8II. The value changes
from 427.0 to 453.0 (Hz).
8.2.4 Volume Slider Action
This selects how the volume sliders react, when you change the volume.
Normal: The value changes immediately, when the volume slider is moved.
Catch: The value won’t change until the volume slider catches the position of the
previously saved Volume value. This setting is designed for live editing to
prevent you from unexpected volume jumps.
8.2.5 Reverb Offset
This parameter sets the global reverb depth offset. The value changes from 0
to 100%. You can decrease the whole depth of the MP8II.
8.2.6 EQ Offset On/Off
This parameter sets the global EQ.
On: The global EQ settings are added to the EQ knob settings.
Off: The global EQ is disabled.
8.2.7 EQ Offset
This parameter sets the global EQ offset value of the MP8II. The value changes
from -12 to +12 (dB).
These parameters - High, Mid High, Mid Low and Low - are each added to the
EQ knob settings. In the case that the total value exceeds +-12dB, it is limited
to +-12dB.
When the EQ Offset On/Off is set to Off, this page won’t be displayed.
8.2.8 Local Control
On: The keyboard of the MP8II and the internal tone generators are connected.
Set this parameter to “On” for normal use.
Off: The internal connection between the keyboard and the tone generators
is switched off. This feature will avoid the “Doubled Sound” that results from
use with an external sequencer equipped with Soft Thru or Echo Thru.