Filter
Top Products
45
8. SYSTEM
Use this mode to set the System parameters of MP8II.
To enter the SYSTEM mode, press the SYSTEM button.
8.1 System Menu
Use the MENU buttons to scroll through the System parameters.
[System Parameter]
System Channel
Touch
System Tune
Volume Slider Action
Reverb Offset
EQ Offset
Local Control On/Off
Multitimbre On/Off
System Channel Mode
Receive Channel On/Off
LCD Contrast
LED Brightness
Out Mode
Foot SW
Wheel Mode
Dump Mode
[System Dump]
Dump Current
Dump All Sound/Setup
[System Reset]
Reset One Sound/Setup
Reset All
Make sure the SYSTEM button is lit.
Press the MENU buttons until the parameter you want to edit appears in the
display.
Set the value of the parameter by using the VALUE buttons.
The value range differs depending on the parameter.
8.2 System Parameters
The System Menu parameters are global and always stored automatically when
leaving the SYSTEM mode, so there is no need to store them.
8.2.1 System Channel
This parameter sets the System MIDI channel on which System Exclusive
messages are transmitted/received.