Filter
Top Products
43
7. STORE
You can save the changes of the settings made as either a SOUND or a SETUP.
Up to 256 SOUNDs or 256 SETUPs can be stored.
Moreover, the Common parameters can also be stored as the initial setting in
SOUND mode.
The following groups of parameters are stored.
[SOUND]
Selected Zone’s One Sound settings:
EFX/REVERB settings ( see page25 )
Control Knob settings -except for EQ ( see page27 )
Int Zone parameters in MENU settings ( see page32 )
-except for parameters with the inverse “S(Setup)” icon
[COMMON]
Initial settings in SOUND mode:
Function SW setting ( see page21 )
COMMON parameters in MENU settings ( see page32 )
-except for parameters with the inverse “S(Setup)” icon
[SETUP]
MP8II’s whole settings of 4zones:
Sound Selection, Zone On/Off Status ( see page15 )
EFX/REVERB settings ( see page25 )
Fader, Control Knob settings ( see page17, page27 )
Function SW setting ( see page21 )
MASTER TRANSPOSE setting ( see page18 )
All MENU settings ( see page32 )
7.1 Storing the settings as a SOUND
While in SOUND mode, press the STORE button. The display will show the
following screen:
Press the VALUE UP button, the display will show the following screen:
Press the VALUE UP button to confirm. The STORE procedure can be cancelled
at any time by pressing any other button which is not used during the STORE
procedure.
Note:
Storing will overwrite the selected SOUND.
If the selected zone is external, the SOUND cannot be stored.