Filter
Top Products
35
6.2.8 TX Prg # (Ext only)
This parameter determines if a Program Change Number will be transmitted
(On) or not (Off) when a SETUP is recalled. If you want to switch sounds on
external MIDI devices every time you call the Setup turn this parameter ON.
6.2.9 Prg # (Ext only)
This parameter determines which Program Change Number will be transmitted
when a SETUP is recalled. When the TX Prg # is set to Off, this page won’t be
displayed. Select the desired PRG number for the sound you want to select on
the external MIDI device.
6.2.10 TX Bank (Ext only)
This parameter determines if Program Bank Numbers (MSB, LSB) will be
transmitted (On) or not (Off) when a SETUP is recalled. If your external MIDI
device requires a Bank Select message, turn on this function.
6.2.11 Bank MSB/LSB (Ext only)
This parameter determines which MSB and LSB
Number will be transmitted when this SETUP
is recalled. When the TX Bank is set to Off,
this page won’t be displayed.
In the MIDI standard, there are 128 storage
spaces. The number of storage spaces can
be expanded using an MSB and an LSB.
This is a 3D image of the expanded program change system with the MSB and
LSB. To use these efficiently and correctly, refer to the operation manual of
any external MIDI sound modules that are connected to the MP8II.
6.2.12 Keyborad On/Off (Ext only)
This parameter determines whether or not note data generated by playing the
keys on the MP8II will be transmitted to an external MIDI device. This parameter
is useful when using 2 or more keyboards. When set to OFF the MP8II will not
send any note data to an external MIDI device but the MP8II can still be used
to adjust other connected keyboards or MIDI devices using the knobs, wheels
etc.