Filter
Top Products
11
2.Front and rear panel
2.Front and rear panel
Step Key section
1
2
3
4
5
1. Select keys
By pressing these keys to turn the Select LEDs on or off, you can use the sixteen step
keys below as up to 64 step keys.
When the Keyboard function is on, these keys are used to switch the octave.
In Song mode, these keys function as rewind and fast-forward keys. When the Pattern
Set function is on, they are used to switch Pattern Set groups.
2. Select LEDs
The upper row of LEDs (green) indicates the location (length 1...4) within the pattern of
the currently-playing pattern.
The lower row of LEDs (red) indicates the location (length 1...4) of the pattern indicated
by the step keys. When the Pattern Set function is on, these LEDs indicate the pattern
set group. When the Keyboard function is on, these LEDs indicate the octave position.
3. Step keys 1...16
Use these keys to modify and audition the rhythm or phrase pattern of each part.
When the Keyboard function key is on, these keys function as a keyboard, allowing
you to play sounds. When the Pattern Set function is on, use these keys to select pat-
terns that you have assigned.
4. Keyboard, Pattern Set key
This makes the sixteen step keys function as a keyboard. Each time you press this key,
the setting will alternate on/off. By holding down this key and pressing one of the step
keys, you can switch to the pattern that you assigned to that key (Pattern Set function).
5. Shift key
This key is used in conjunction with other keys. When held down, it gives an additional
function to another key.
Shift + Play/Pause key:Playback from the beginning of the pattern.
Shift + Rec key:During playback, erase triggers from the pattern.
Shift + Step keys:Execute the function shown below each step key.
For other Shift key combinations, refer to the explanation of each parameter.