Filter
Top Products
TRITON Training Guide
17
Tip: When you edit a Program with the Performance Editors and want to update the Program quickly -
press the REC/WRITE key. A popup menu prompts you with the famous Korg words: "Are You Sure", and
you can confirm the update by pressing OK. If you want to write your edited Program to another location,
versus overwriting the existing Program, press the Performance Edit page menu command in the upper-right
of the display, press "Write Program", choose the destination bank, category and Program number, then
press "OK" to write the new Program.
The Real-time Control Knobs
The 4 Real-time Control knobs have 2 mode settings - A and B. You can toggle between each mode by
pressing the REAL-TIME CONTROL key. In A mode, cutoff, resonance, EG intensity and EG release are
controlled for every Program, Combination or Song. When each knob is set to the 12 o'clock position, the
original parameter value for the Program or Combination is recalled. In B mode, the settings of each knob
can be defined for each individual Program, Combination or Song.
AMS and Effect Dynamic Modulation
The Joystick, Ribbon controller, knobs, etc. are all used to control the sound in various ways. This is called
AMS or Alternate Modulation Source. As you play, and even as you record into the internal - or an external
sequencer, AMS can be used in realtime to control the sound. External MIDI data can also control the
TRITON's AMS and effect functions. The Insert and Master effects are controlled by Effect Dynamic
Modulation.