Filter
Top Products
TRITON Training Guide
80
Now, we're ready to record:
1. Press the MENU button.
2. Press the EXIT button. This will take you out to the first Sequencer Screen.
3. Touch the "Pref." Tab at the bottom right hand side of the screen.
4. Touch the box next to "Multi REC" so that it is checked.
5. Press the Arpeggiator "On/Off" button so that it is lit.
6. Touch the arrow next to "Track 01".
7. Touch "Track 03". Track 3 is the first track in the Combination that is on Channel 1. Multi-channel
recording must start with MIDI channel 1 to work, so always start recording on whichever is the first track
set to MIDI channel 1.
Now, record using the normal method:
8. Press the "REC/WRITE" button.
9. Press the "START/STOP" button. You'll get two measures counted in to get ready.
10. Record. When done, press the "START/STOP" button to finish recording, then the "LOCATE" to
rewind back to the start.
That’s all there is to it. Once you have finished recording you can undo the status of the Dummy tracks and
reuse them to play regular parts. You could even reassign the Arpeggiators to other tracks using this same
method and record multiple arpeggiated “passes” – just remember to keep the MIDI channels separate from
all other parts!
How to determine which Tutorial to use for a Combination:
1. Press the SEQ. button to enter the Sequencer Mode.
2. Touch the arrow on the top right hand side of the screen.
3. Touch "Copy From Combi".
4. Using the value wheel, slider or buttons, select the Combination you wish to use.
5. Touch "O.K."
6. Press the MENU button.
7. Touch "Track Param."
Look at the MIDI channels for the first 8 tracks. If there is one or more tracks that use a channel other than
1, use Scenario 1. Again, a hidden drum rhythm is a sure sign of type of Combination. If all tracks are on
channel 1, use Scenario 2.