Filter
Top Products
TRITON Training Guide
23
Take a "tour" of Program A034's arpeggio setup:
For now, we'll take you through the Arpeggio tab settings - the "performance edit" functions of an arpeggio
pattern in Program mode. This tab is great to go to when you want to edit the arpeggio pattern "on the fly", in
performance, or simply to try new patterns!
1. Press the Arpeggio tab at the bottom of the display. You'll see that U135 is the arpeggio pattern
assigned to this Program (Pat:> U135 (A/B): Pentatonic).
2. Play and hold down C2 (low-C on TRITON) to hear the pattern - note in the display that the Octave
range has been set to 1 octave. Press the Octave 4 radio button, then play and hold down C2 again -
you'll hear the arpeggio pattern play through a 4-octave range, then continue to loop. The Octave setting
lets you specify the range of octaves for the pattern.
3. Press the Octave 1 radio button again.
4. For this Program, the pattern Reso parameter is set to a16
th
note. Resolution is the interval between
arpeggiated notes. Press the popup button to the right of Reso, then press to select an 8
th
note from
the popup menu, and restrike the C2 key to hear the interval change.
5. Re-select the 16
th
note from the Reso popup menu.
6. Press the check box to the left of Latch, play the C2 key and take your hand off the keyboard. When
Latch is checked, the pattern will continue when you take your hand off the keyboard - when un-
checked, the pattern will stop when you release the keyboard.
7. Press to un-check the Latch box.