Filter
Top Products
15
RoomPerfect™ can derive information about:
• Room acoustic properties and modes (peaks and dips in
the room)
• Power response throughout the room
• Loudspeaker directivity
• High frequency roll-off
• Characteristics of low frequency roll-off
From the acquired measurements, RoomPerfect™ processes the
information and sets up amplitude targets and limiters for the
different filters in an automated process. The most challenging
task for a room correction system is the automated correction of
an already near ideal system – but RoomPerfect™ is capable of
solving even this challenge and compensates using minor
corrections.
In the ERGO system, RoomPerfect™ automatically identifies the
optimal target curve from the information in the measurements
and everything after that is controlled by the calibration
software (ERGO Cal). In a new ERGO installation, the software
guides you through the set up sequence, indicates when to move
the microphone, monitors the quality of the measurements, and
continues the process until the necessary information is retrieved
and the filters for “global” and “focused” correction can be
calculated.
Visit
www.lyngdorf.com/index.php?option=com_content&task
=view&id=91&Itemid=35
to find information about
RoomPerfect™.
33..66 SSooffttwwaarree IInnssttaallllaattiioonn
To insta
ll ERGO Cal software, insert the
KRK ERGO Installation
CD
and follow the next instructions;
MMaacc
1. Insert the
KRK ERGO Installation CD
and double click the
ERGO
software installer.
2. After the installation process is finished, the
ERGO
Calibration Wizard
will start automatically. Follow its
instructions.
In Mac systems, ERGO uses Apple’s Core Audio FireWire
functionality to provide plug and play operation. Once
connected to a Mac’s FireWire port, ERGO is recognized and
automatically added as an option in the Sound Preference panel
and to any Core Audio compliant software.
PPCC
If the
KRK ERGO Installation CD
does not automatically Autorun,
double click
My Computer
, right-click the
KRK ERGO
icon, and
click
OOppeenn
.
1
. Double click the
ERGO Software v1.0.0
.exe. The
KRK ERGO
Installation Wizard
will guide you through the installation
process.
2. After the installation process is finished, the
ERGO
Calibration Wizard
will start automatically. Follow its
instructions.
To open the ERGO Control Panel go to
Start > Programs > KRK
ERGO
and click
EERRGGOO CCoonnttrrooll PPaanneell..
Once i
nstalled correctly, you should have the following items on
your computer:
• PDF of the ERGO User’s Manual
• ERGO Cal Room Correction Software
• ERGO Control Panel
• ASIO and WDM Drivers (installs on PC only)
33.. SSeettttiinngg uupp EERRGGOO aanndd yyoouurr MMiixxiinngg EEnnvviirroonnmmeenntt