Filter
Top Products
21
One Mississippi, two Mississippi... (Figure 5.14)
Well, how did things go? If the level did not fall within an
acceptable parameter, ERGO will notify you. This doesn’t
necessarily mean that something is wrong. A possibility is that
your speakers do not produce a high enough SPL to register, but
the calibration can still be performed. (Figure 5.15)
In this instance, select NO at the ERGO Cal screen to accept the
level that was originally measured and then click
EEnntteerr
.
TTiipp
If
you see the Clip LED light up during this step, your
volume level is probably just fine, and you should use this
volume level regardless of what ERGO displays
(Figure 5.16). Press
EEnntteerr
to
continue.
Tick tock, tick tock... (Figure 5.17)
55.. EERRGGOO CCaalliibbrraattiioonn SSooffttwwaarree ((EERRGGOO CCaall))
Figure 5.14
Figure 5.15
Figure 5.16
Figure 5.17